The Anytone 868 organizes channels into "Zones." Because the radio can hold thousands of channels, proper zoning is critical for usability in the UK. Organize your zones by geography or function:
For UK-based amateur radio operators, a codeplug for the AnyTone AT-D868UV Go to product viewer dialog for this item.
Setting up an for the UK involves balancing regional repeater data, digital talkgroups, and the radio's specific firmware requirements. Because the 868 is an older model, finding a "one-click" current codeplug can be difficult, but several reliable UK-based resources offer solid foundations. 1. Primary UK Codeplug Sources
Connect your radio to the PC using the USB programming cable. Turn the radio on. Open the CPS, select the correct . anytone 868 codeplug uk
Repeaters change frequencies, colour codes, or networks. Regular updates ensure your codeplug remains functional:
virtual channels grouping users by geography or interest.
Known for producing a generic UK codeplug designed for plug-and-play use. FreeDMR UK The Anytone 868 organizes channels into "Zones
Assign your talk groups to Time Slot 1 or Time Slot 2 based on local repeater rules. Where to Find Pre-Made UK Codeplugs
Include all timeslots and talkgroups for the 3 or 4 repeaters closest to your home QTH.
| Zone Name | Contents | |------------|----------| | | 145.500 (S20 calling), 145.400, 145.575; 433.500 (S20 UHF), 433.400, 433.575 | | UK FM Repeaters | Local 2m & 70cm analogue repeaters (with CTCSS where needed) | | UK DMR (BM) | UK BrandMeister talkgroups (see §4) on local DMR repeaters | | PMR446 (RX) | 8 PMR446 channels (RX only – set TX disable) | | Emergency | Calling channels + CB UK (RX only optional) | | Scanner | Marine VHF, airband (RX only – if radio supports) | Because the 868 is an older model, finding
Select the Talkgroup you want to link to this channel (e.g., TG 235 for Slot 1). Step 5: Organize Channels into Zones
Before you can use any DMR codeplug, you register for a unique DMR ID. This 7‑digit number identifies you on DMR networks, similar to a callsign. Registration is free and can be done at RadioID.net . Your DMR ID must be entered into the Radio ID List within the AnyTone CPS before any codeplug can be used.
Note: The 430-432 MHz segment is for secondary use only (weak signal modes like SSB/CW). Stick to 433.000-433.500 and 434.000-434.500 for FM simplex.