Privacy
Restart your PC and press F2 or Del to enter BIOS setup. Note the BIOS version displayed.
After the update completes successfully, the system should restart. You'll need to re-enter the BIOS Setup (press DEL) to verify the new version number is displayed. It's recommended to "Load Optimized Defaults" (or a similar option) and then save and exit. If you encounter issues:
Once the FreeDOS command prompt loads ( C:\> or A:\> ), type the name of the batch script included in your BIOS folder (usually update or flash ) and press . Example: C:\> update.bat Foxconn H61mxv V2.0 Bios Update
To properly update the BIOS on your motherboard, you must use a bootable USB drive and DOS-based flashing tools .
When the program reports a successful operation, it will return you to the command prompt. Restart your PC and press F2 or Del to enter BIOS setup
: After the update completes and the system reboots, shut down and remove the CMOS battery for 30 seconds or use the "Clear CMOS" jumper on the motherboard to reset settings.
already, or would you like help finding a community-verified link for your exact hardware revision? You'll need to re-enter the BIOS Setup (press
Appendix: Useful commands and notes