Anschutz Gyro Compass Standard 20 Service Manual ⚡

Enter the vessel’s current latitude and average cruising speed using the control panel keys.

This comprehensive technical article serves as a deep-dive guide into the Standard 20's system architecture, routine maintenance protocols, error codes, and troubleshooting procedures. 1. System Overview and Technical Specifications

The supporting fluid degrades over time due to operational heat, which can cause sediment build-up and erratic tracking. anschutz gyro compass standard 20 service manual

Fill the container with genuine Anschutz supporting fluid and distilled water mixed precisely to the specified ratio found in your specific manual annex (usually dependent on ambient temperature profiles).

The compass room must ideally be maintained between -10∘Cnegative 10 raised to the composed with power C +55∘Cpositive 55 raised to the composed with power C Enter the vessel’s current latitude and average cruising

An electronic servo loop senses the relative position of the floating gyrosphere against the outer housing. The follow-up motor continuously drives the outer housing to perfectly match the position of the gyrosphere. This prevents friction from disturbing the heading reference. 3. Routine Maintenance Procedures

Ensure the mounting foundation is perfectly horizontal. Use a machinist’s bubble level on the upper rim of the compass outer container. Adjust the mounting foot-screws until the container sits dead-level. The follow-up motor continuously drives the outer housing

Use the service syringe to extract the old supporting fluid from the outer container. Dispose of it according to environmental regulations.

≤ 3 hours (standard settling); approx. 1 hour with quick-settling function.

Ensuring the compass is aligned according to manufacturer specs.