Patton Heater Model Poh2501 Manual

The Patton POH2501 is a heavy-duty, portable utility heater engineered for demanding environments like garages, workshops, and basements. Known for its rugged construction and reliable heat output, this convection heater keeps workspace temperatures comfortable during colder months.

Patton (now under the parent company Sunbeam/Newell Brands or historically Patton Electric ) has not hosted a PDF for this specific discontinued model.

Turn the fully clockwise to the highest setting. Turn the Power Selector to High . Let the room warm up to your desired comfort level.

– Turn the thermostat dial (the one with the dots) to its maximum setting. The heater’s thermostat acts as a switch: if the room is already warmer than the selected dot, the heating element will remain off. Setting it to maximum forces the unit to call for heat. As you rotate the thermostat from minimum to maximum, listen for a faint “click.” If you do not hear a click, the thermostat may be defective. patton heater model poh2501 manual

The is a portable oil-filled electric radiator heater designed for indoor use in areas up to 380 square feet , such as rooms, garages, or basements. While a direct PDF for this specific model number is not hosted on the main Patton support site, the following report summarizes the essential operating, safety, and maintenance instructions derived from official Patton documentation for similar radiator models. Product Overview Type: Electric Oil-Filled Radiator.

Always place the heater on a firm, flat, and level surface. Never place it on beds or deep carpets where openings may get blocked.

Here are some additional tips to help you get the most out of your Patton Heater Model POH2501: The Patton POH2501 is a heavy-duty, portable utility

Wipe the heavy-duty metal housing with a soft, slightly damp cloth. Do not use abrasive cleaners or chemical solvents.

The Patton Heater Model POH2501 is a reliable oil-filled electric radiator known for its quiet operation. While official manuals have become harder to locate as the product has aged, understanding its simple dual-dial control system (power selector and dot-marked thermostat) is key to optimal operation. Common issues can often be resolved by checking the tip-over safety switch or adjusting the thermostat setting. For more complex repairs, tracking down a genuine replacement assembly or contacting the manufacturer's parts department is recommended.

If the heater shows no signs of life, you can check for an electrical open circuit: Turn the fully clockwise to the highest setting

: This is a dial labeled with numbers (e.g., 1 through 6 or low to high).

: Plug the heater directly into a 120V AC wall outlet. Do not use an extension cord or power strip, as this significantly increases the risk of fire.