K150 Pic Programmer Software Windows 10 Jun 2026

: The software does not typically require a standard installation; it can be run directly from its folder. Configuration Port Selection : You must manually set the COM port in the software ( File > Port ) to match the virtual COM port assigned by Windows. Programmer Type

Many K150 units pretend to be a PICkit 2. Try:

The original Micropro software does not feature an auto-detect function for modern COM ports, meaning manual routing is required. k150 pic programmer software windows 10

The K150 PIC programmer software is a popular tool for programming and debugging PIC microcontrollers. While it may have compatibility issues with Windows 10, it's possible to use the software with some tweaks and workarounds. By following the steps outlined in this article, you should be able to use the K150 PIC programmer software on Windows 10. If you're unable to get the software to work, there are alternative software options available.

: Newer official Prolific drivers often flag these older chips as "phased out" or "unsupported," resulting in a "Code 10" error in Device Manager. : You must manually install an older, unofficial driver (often version 3.3.2.102 or similar from circa 2008). Installation Tip : Once the old driver is installed, you may need to use Device Manager : The software does not typically require a

Launch the microPro.exe application. Because of the previous step, Windows will ask for administrator confirmation; click . 1. Connect to the Correct COM Port

Look for a reliable K150 software archive online. The package should ideally contain: Try: The original Micropro software does not feature

Wait for the green progress bar to finish. A success message will appear. Troubleshooting Common K150 Errors "Reset Error" or "Programmer Not Found"

Expand the section. You will likely see a yellow warning triangle next to Prolific USB-to-Serial Comm Port . Right-click the warning device and click Update driver .

Check the box for and select Windows 7 or Windows XP (Service Pack 3) .

: If Windows 10 automatically updates the driver again, right-click the device in Device Manager, choose "Update driver" > "Browse my computer" > "Let me pick from a list," and manually select the older version .