Verify the voltage is approximately before final connection.
The Levant allows for adjustable seat-to-footrest heights. Select the appropriate bolt holes on the seat post based on the user's physical requirements before locking it down.
Immediately reinstall and securely tighten the mechanical end stops at the top of the rail. Never operate the lift without end stops securely in place.
: The Levant is designed for straight staircases with a constant gradient between 28° and 53° Space Clearance : The minimum staircase width required is typically to allow for the seat and footrest movement. Electrical Setup : A standard 13-amp power outlet thyssenkrupp levant stair lift installation manual
The outlet should ideally be on a non-switched circuit to prevent accidental power cut-offs to the battery charging system. 2. Component Inventory and Tools Required
: The motorized base that houses the battery pack and drive mechanism [6, 19].
Before beginning the installation, ensure the staircase meets the following technical specifications: Verify the voltage is approximately before final connection
The Levant features sensitive safety edges on the footrest and the sides of the carriage. Drive the lift in one direction using the armrest toggle. While it is moving, gently press the edge of the footrest. The lift must stop instantly.
Specifically 10mm, 13mm, and 17mm sockets.
The technician will confirm the stair length and configuration. They will sort the rail sections, brackets, and legs according to the installation drawing. They will also locate the best position for the transformer and call stations. Electrical Setup : A standard 13-amp power outlet
The Levant rail is designed to be secured directly to the stair treads, not the wall, eliminating the need to structural wall reinforcement.
Lower the seat assembly onto the mounting post protruding from the top of the carriage. Adjust the seat height to match the user's comfort level by selecting the correct pinning hole on the column. Secure it tightly using the main locking bolt and torque it to spec. Connect the internal communication wiring harness extending from the seat to the carriage interface port. 5. Wiring, Electrical Connections, and Charging Blocks
Verify that the carriage slows down smoothly and stops automatically at the terminal charging points.