If you need help with a specific issue, please share the flashing on your panel, the ambient temperature of your workshop, or the type of water currently in use. Share public link
| Feature | CWFL-6000ENW12 | CWFL-6000FNP / ENP | | :--- | :--- | :--- | | | 6000W (nominal) | 6000W | | Temperature Stability | ±1°C | ±1°C | | Control Range | 5°C ~ 35°C | 5°C ~ 35°C | | Power Supply | AC 3P 380V 50Hz | AC 3P 380V 50/60Hz | | Compressor Power | 3.05 kW | 3.05 kW / 4.2 kW | | Tank Capacity | 22 L | 70 L | | Dimensions (L x W x H) | 142 × 73 × 113 cm | 105 × 71 × 136 cm (ENP) | | Weight (Net) | 164 kg | 170 kg |
The manual advises against it. Overcooling a smaller laser can cause condensation inside the resonator. Use the CWFL-4000 instead. cwfl-6000 manual
use purified water, distilled water, or deionized (DI) water. Step-by-Step Water Filling Locate the water level gauge on the back of the chiller. Open the filling port at the top of the tank.
Perhaps the most practically useful section of the CWFL-6000 manual is the alarm code table. When the chiller fails, it displays an error code (e.g., E01 = Low water flow, E04 = High ambient temperature). The manual provides a systematic flowchart for each code. For example: If you need help with a specific issue,
Press any button on the temperature controller panel to mute the audible buzzer. However, the error code will continue to flash, and the laser interlock will remain open until the root cause of the error is physically corrected. 7. Storage and Decommissioning
The TEYU S&A is designed with a dual-temperature circuit, making it an ideal cooling solution for fiber lasers and their optics simultaneously. Use the CWFL-4000 instead
: After the system has run for a few minutes, visually inspect all hose connections and fittings for any signs of leakage.
If you need to configure a specific parameter not covered in this guide, please let me know:
The front panel of the CWFL-6000 is where most users first reach for the manual. Here’s a translation of the key functions: