Because the driver lacks an automatic executable installer, you must point Windows to the driver files manually.
To successfully install and configure the USB driver for a , you must download the driver from an official source, install it manually through the Windows Device Manager if necessary, and then configure the corresponding COM port within the Xinje programming software (XDPPro or XCPPro). 1. Driver Acquisition and Installation
Select the exact that you identified in the Device Manager. xinje plc usb driver install
Ensure the checkbox for is marked, then click Next .
The USB driver is typically included with the Xinje programming software or available as a separate "COM-USB driver" download. : Access the official Xinje Download Center or the specific XD3 series product page to find the latest "COM-USB driver". Manual Installation Because the driver lacks an automatic executable installer,
In this guide, we’ll walk through the Xinje PLC USB driver installation process, troubleshooting the "Port not found" error, and getting your hardware online.
software, look in the corresponding installation folder for the USB_Driver directory. 🔌 Step 2: Connect the Hardware Power on your into the PLC and then into your computer. Driver Acquisition and Installation Select the exact that
During the installation process, a Windows Security popup may ask, ""
C:\Program Files (x86)\Xinje\XD-Config\Driver For XC Series: C:\Program Files (x86)\Xinje\XDPPro\Driver
Click the button and target the software driver folder mentioned in Method 1 (e.g., C:\Program Files (x86)\XGPad\Driver ). Ensure the checkbox for Include subfolders is ticked.
If you have followed all the steps and still face issues, try these final checks: