Mc101 Manual — Sinotimer

If you provide the (e.g., kiln, oven, smoker) and sensor type , I can help you with:

The Sinotimer MC101 is equipped with auto-tuning, which automatically calculates the PID parameters ( ) based on your system's thermal characteristics. Set your desired temperature (SV). Enter the parameter menu (hold SET), find . Change ATcap A cap T from 0 to 1. The AT light on the panel will begin flashing.

Terminals for your SSR (Solid State Relay) or mechanical relay. 2. Selecting Your Sensor Type

Here’s a plain-English breakdown of each mode from the : sinotimer mc101 manual

Key features of the SINOTIMER MC101 as detailed in its manual include:

Press and hold (or MODE + < ) for 3 seconds until "COD" or a parameter code appears. Auto-Tuning

Use the key to select the digit you wish to change. Use the UP or DOWN arrows to adjust the temperature. Press SET again to save and exit. 2. Configuring Sensor Type and Units If you provide the (e

Always disconnect the power supply before wiring the device. Refer to the diagram printed on the side of your specific unit, as terminal layouts can vary slightly between manufacturing batches.

The is a high-precision digital PID temperature controller designed for industrial and hobbyist applications. This guide covers the essential steps for wiring, basic programming, and advanced PID configuration based on the MC101 Series manual . Key Specifications & Features Accuracy : 0.3% measurement accuracy.

I can provide a custom wiring diagram or specific parameter list based on those details. MC-101Series Change ATcap A cap T from 0 to 1

Determines how output is handled.• 0 : PID Control (Recommended)• 1 : ON/OFF Control (Acting like a traditional thermostat) Hysteresis

To follow this manual effectively, locate the following components on your Sinotimer MC101: