Ipm17-002 - Motherboard Manual

This board typically only has two DIMM slots, maxing out at 32GB total memory (2x16GB DDR4). 4. Troubleshooting and Maintenance

The LGA 1151 socket on this board supports a wide range of processors, though you must check the BIOS version for 7th Generation support. ipm17-002 motherboard manual

The BIOS features are minimal compared to a retail motherboard. Typical settings include Boot Order, enabling/disabling virtualization (VT-x), SATA configuration, and basic security settings. Advanced overclocking or detailed voltage controls are not available. This board typically only has two DIMM slots,

DDR4 2133 MHz or 2400 MHz (Higher speed RAM will downclock to match chipset limits) Type: Non-ECC, unbuffered DDR4 SDRAM Installation Steps Open the retaining clips on both ends of the DIMM slots. The BIOS features are minimal compared to a

One PCI Express x1 slot for Wi-Fi cards, sound cards, or extra USB ports.

| Jumper | Pins | Function | | :--- | :--- | :--- | | (Labeled JBAT1) | 1-2 (Closed) | Normal Operation | | | 2-3 (Closed) | Clear CMOS (Hold for 10 seconds while PC is unplugged) | | PSWD (Password Clear) | 1-2 (Open) | Normal | | | 1-2 (Closed) | Clear BIOS Password (Boot once, then remove jumper) |

Up to 91W TDP; compatible with Intel 7th Generation (Kaby Lake) and 6th Generation (Skylake) processors, such as the Core i7-7700K and i5-7600K. Memory: Dual-channel architecture. Two 288-pin DDR4 DIMM sockets.