Kirisun Pt8100 Programming Software [top] Access

Extract the Kirisun PT8100 programming software ZIP archive.

Check the physical sticker on the radio to confirm if it is VHF (136-174MHz) or UHF (400-470MHz). Create a new file with the correct model parameters. Corrupt or counterfeited PL2303/FTDI driver issue.

Input your frequencies, CTCSS/DCS codes, and transmit power (High/Med/Low).

To program the radio, you need a compatible PC and specific hardware:

Go to "Setup" or "Communication" and select the correct COM port identified in Device Manager. kirisun pt8100 programming software

Navigate to Setup > Communication Port to select the correct COM port (check Device Manager if unknown).

Ensure the correct USB-to-serial drivers (often Prolific or CH341) are installed to establish a stable COM port connection.

: Not all software versions support every midband (66–88 MHz) or UHF model variant. Usage Tips

A 12-13.8V DC power supply to power the mobile radio during programming. 3. Installing the Software and Connecting the Hardware Follow these steps to set up the programming environment: Extract the Kirisun PT8100 programming software ZIP archive

Before attempting to program your Kirisun PT8100, ensure you have the proper hardware and software environment to prevent data corruption or connection timeouts. Hardware Requirements

: May require troubleshooting or specific drivers (like the Prolific USB-to-Serial driver) to work on Windows 10 or 11.

Organizing 256 channels into zones and setting channel names.

Kirisun PT8100 programming software (Customer Programming Software or CPS) is a dedicated tool used to configure frequencies, signaling, and advanced features for the Kirisun PT8100 mobile radio series. This software allows users to manage up to 256 channels and customize the radio's five programmable buttons for specific operational needs. Key Features of the Programming Software Corrupt or counterfeited PL2303/FTDI driver issue

: Includes tools for cloning settings across multiple units and viewing device info (serial numbers, firmware versions) for diagnostics. Review Summary: Pros & Cons Pros Cons

The Kirisun PT8100 programming software offers a user-friendly interface and a range of features that make it easy to program and manage the radio. Some of the key features include:

Run the installer on your Windows PC. The software is typically lightweight (around 2.7MB) and designed for Windows operating systems (WinAll). Follow the on-screen instructions to complete the installation.

For a repeater channel, set RX to the repeater’s output frequency (what you listen on) and TX to the repeater’s input frequency (what you transmit on). The PT8100 does not have automatic offset calculation like a ham radio—enter both manually.