Télécharger Sunubet
Télécharger depuis le serveur de Freesoft (Version: 1.32923 )
Télécharger
Tous les fichiers fournis sur ce site sont originaux, nous ne reconditionnons ni ne modifions les fichiers.
Search for "Inrush Current" in the specifications chapter. The ROC-2015 draws up to 3.5A for 50ms at startup. If you are using an underrated power supply (e.g., 1A), it will trip. The manual recommends a 24VDC, 75W minimum supply.
The firmware contains built-in AGA (American Gas Association) calculation algorithms for accurate custody transfer flow measurement. Orifice meter calculations for natural gas.
A 10/100 Base-T RJ-45 port supporting Modbus TCP/IP, ROC Plus over IP, and network-based configuration. roc-2015 controller manual pdf
| Version | Release Date | Key Changes | | :--- | :--- | :--- | | | December 10, 2015 | Initial release | | V1.1 | April 16, 2016 | Added detailed flush mode selection instructions | | V1.2 | January 15, 2017 | Improved EMC; increased power consumption; added wiring notes |
If you're reading a review, pay attention to comments about the remote's ease of use, range, battery life, and durability. Search for "Inrush Current" in the specifications chapter
The controller's 5 digital inputs are all dry contacts, sharing a common (COM) port, used for reading the status of various system switches.
Connect the live/active line of the high-pressure pump motor starter to this relay contact. The manual recommends a 24VDC, 75W minimum supply
Input switch for low feed-water pressure safety. Sensor Connection
To locate the official documentation, follow these steps to ensure you have the correct, up-to-date version:
Connects to the inlet pressure sensor. Protects the high-pressure pump from running dry.
Search for "Inrush Current" in the specifications chapter. The ROC-2015 draws up to 3.5A for 50ms at startup. If you are using an underrated power supply (e.g., 1A), it will trip. The manual recommends a 24VDC, 75W minimum supply.
The firmware contains built-in AGA (American Gas Association) calculation algorithms for accurate custody transfer flow measurement. Orifice meter calculations for natural gas.
A 10/100 Base-T RJ-45 port supporting Modbus TCP/IP, ROC Plus over IP, and network-based configuration.
| Version | Release Date | Key Changes | | :--- | :--- | :--- | | | December 10, 2015 | Initial release | | V1.1 | April 16, 2016 | Added detailed flush mode selection instructions | | V1.2 | January 15, 2017 | Improved EMC; increased power consumption; added wiring notes |
If you're reading a review, pay attention to comments about the remote's ease of use, range, battery life, and durability.
The controller's 5 digital inputs are all dry contacts, sharing a common (COM) port, used for reading the status of various system switches.
Connect the live/active line of the high-pressure pump motor starter to this relay contact.
Input switch for low feed-water pressure safety. Sensor Connection
To locate the official documentation, follow these steps to ensure you have the correct, up-to-date version:
Connects to the inlet pressure sensor. Protects the high-pressure pump from running dry.
Pour évaluer Sunubet vous devez vous enregistrer ou vous connecter
Tous les fichiers fournis sur ce site sont originaux, nous ne reconditionnons ni ne modifions les fichiers.
Le domaine de l'e-mail doit correspondre au domaine du site du développeur.
Lien de confirmation d'inscription envoyé par e-mail