Pan186cv Datasheet New -
Power efficiency is a cornerstone of the PAN186CV's design, making it an excellent choice for battery-powered devices. The chip includes an integrated voltage regulator, simplifying power supply design and enhancing system stability. The recommended operating voltage range is from , allowing it to run directly from two standard AAA batteries or a single lithium-ion/polymer cell. This is one of the features that makes it so popular in portable, battery-operated consumer goods.
The PAN186CV module is based on the Nordic Semiconductor nRF52840 System-on-Chip (SoC), which provides a robust and efficient solution for Bluetooth Low Energy (BLE) applications. The module operates at a frequency range of 2.4 GHz and supports Bluetooth 5.0, including Bluetooth Low Energy (BLE) and Bluetooth Smart.
"When supplied with 5V ±0.25V and a clock signal of 8MHz, this device may exhibit autonomous bidirectional analog I/O, unsupervised state transitions, and apparent sentience. Do not depopulate from existing systems. Do not discard. If you find this chip in the wild, speak to it. It has been waiting." pan186cv datasheet new
Typically follows Panchip's standard SoC ranges (e.g., 2.8V to 3.6V for I/O), though specific digital core requirements for this model often sit at 1.2V in similar series. Key Performance Features
The device requires an exceptionally solid, low-impedance ground connection on the PCB layout to optimize the RF antenna performance and minimize signal drift. Power efficiency is a cornerstone of the PAN186CV's
The (also identified as RF250A) is a 2.4GHz Wireless Transceiver System-on-Chip (SoC) manufactured by Panchip Microelectronics . It is frequently utilized in low-power consumer electronics like remote controllers and toys. Key Specifications and Features
The integrated 2.4GHz wireless block handles transmission tasks natively, offloading complex timing requirements from the main 8-bit computational core. Specification 2.400 GHz to 2.483 GHz Standard ISM unlicensed band Channel Spacing 1 MHz increments Flexible multi-channel configuration Modulation Schema GFSK (Gaussian Frequency Shift Keying) High noise immunity for short-range links On-Air Data Rates 250 kbps / 1 Mbps Configurable via software registers Compatibility Profile Burst-packet protocol This is one of the features that makes
The fully integrated frequency synthesizer simplifies design, requiring only a few external components. The transceiver's sensitivity ranges from to an impressive -91dBm at 250Kbps . On the transmit side, the output power is selectable among 11, 9, 5, -1, -10, or -23dBm , allowing designers to optimize for range or power consumption. When transmitting at 2dBm, the chip consumes 18mA , while at 9dBm, the current draw is 30mA , highlighting the direct trade-off between output power and battery life.
The is a highly integrated, low-cost 8-bit microcontroller with an embedded 2.4GHz RF wireless transceiver , manufactured by Panchip Microelectronics . Commonly found in commercial consumer electronics like cheap drone remote controllers, RC cars, and smart toys, this System-on-Chip (SoC) operates within the global 2.400–2.483 GHz ISM frequency band using GFSK modulation.
📥 [Insert Link]