Gmr32b Phase Controller Manual Jun 2026
GMR-32B. Jiefeng Code : JDQ-GMR-32B. Color : Black. Lead Time : 3 Days. Add to basket Stock: 1000.
Periodically check terminal screws for tightness, as thermal cycling can loosen connections.
The phase controller monitors incoming power continuously for five severe operational anomalies. If a fault occurs, the internal relay trips immediately to open the control circuit and save downstream hardware: gmr32b phase controller manual
One or more phases have dropped to 0V, or a large, unsafe voltage discrepancy exists between phases.
The GMR32B is maintenance-free except for: GMR-32B
If you need to narrow down a specific operating issue with your controller, tell me:
Activates when input voltage exceeds safety thresholds. Lead Time : 3 Days
Connect the three-phase power lines here. The sequence matters for phase reversal detection.
For highly inductive loads (like transformers) or cold-resistance elements (like Silicon Carbide heating elements), set to at least 5.0 seconds. This dampens high inrush currents, preventing nuisance fuse blowing or breaker trips. 5. Maintenance and Troubleshooting Routine Maintenance
| Model / Variant Name | Key Feature / Difference | | :--- | :--- | | | Standard model. Basic 3-wire (no neutral) phase controller. | | GMR-32B+N | Specialized model for 3-phase, 4-wire (+ Neutral) systems, including Neutral Loss protection. | | GMR-YK-32B | Variant with extended functionality and remote control capability. | | GMR-32BT | Variant with timer functions for delayed start or reset, providing more flexible system integration. | | GMR-32BD | Variant with digital display of voltage values and other system parameters. | | Smart GMR-32B | Advanced variant designed for harsh environments, offering enhanced immunity to high-order harmonics and extreme temperatures. | | GMR-52B | Higher current capacity variant for larger load applications. |
Hold for 3 seconds to exit and return to the main operational screen. Critical Parameter Table Parameter Code Description Default Value Adjustable Range P-01 Input Signal Selection (0 = 0-10V, 1 = 4-20mA, 2 = Pot) P-02 Soft Start Time (Ramp time from 0% to 100% output) 0.1s – 30.0s P-03 Minimum Output Limit (Floor voltage limitation) 0% – 50% P-04 Maximum Output Limit (Ceiling voltage limitation) 50% – 100% P-05 Overcurrent Trip Threshold Max Current Dependent on hardware model Calibrating Soft Start