Deform 3d Tutorial Jun 2026

Choose your press type. Select for a hydraulic press simulation and input a speed (e.g., 50 mm/s ).

: Define the contact conditions, including friction coefficients and heat transfer if doing thermal-mechanical analysis. Simulation Control

: Open DEFORM-3D and use the "New Problem" icon to name your project and select the 3D preprocessor. deform 3d tutorial

: Define the simulation title and mode (e.g., Deformation ). This is where you also enable features like Heat Transfer if your process involves temperature changes. 2. Defining Objects and Geometry

Set the relationship to (Dies are always Master, Workpiece is Slave). Choose your press type

The calculation engine that solves the non-linear equations of material deformation and heat transfer.

Simulating a three-step forging (Preform -> Blocking -> Finishing). Simulation Control : Open DEFORM-3D and use the

After simulation completion, use the post-processor to analyze results:

This comprehensive tutorial guides you through the fundamental workflow of setting up, running, and analyzing a 3D hot forging simulation in DEFORM 3D. 1. Understanding the DEFORM 3D Workflow